Step Motors & Drives

Applied Motion Products

Stepper drives are offered in both open frame (DC input) and packaged versions (AC input), in full/half step and microstepping versions. New STAC6 drive also offers advanced features for optimizing step motor performance. Options for Pulse and Direction control or stand-alone control using on-board oscillators (velocity control), Si Programmer software application, and new Q Programmer software application. A full line of complimentary step motors from sizes NEMA 8 to NEMA 42 are available.

Sanyo Denki
   Ø      2 – PHASE STEP MOTORS and DRIVE
   Ø      AC / DC           -   4 wires to motor
   Ø      Step angle:   1.8 degrees or 0.9 degrees
   Ø      Microstep factor 16

Sanyo Denki
   Ø      5 - PHASE STEP MOTORS and DRIVE
   Ø      AC / DC           - 10 wires to motor
   Ø      Step Angle: 0.72 degrees
   Ø      Microstep factor 256 = 0.00281 degrees / step

Sanyo Denki
   Ø      3 - PHASE STEP MOTORS and DRIVE
   Ø      DC only           - 3 wires to motor
   Ø      Step Angle: 3.75 degrees or 1.2 degrees per step
   Ø      Microstep factor 16

Sanyo Denki – closed-loop
   Ø      2 – PHASE “closed-loop” STEP MOTOR and DRIVE
   Ø      AC / DC           -   4 wires
   Ø      Step angle:   1.8 degrees or 0.9 degrees
   Ø      Microstep factor 16